1. 首页 > 投资理念

精准macd通达信(通达信macd指标)

精准macd通达信(通达信macd指标)

内容导航:
  • 请高手修改一下 MACD 公式 通达信的
  • 通达信用macd指标捕捉起爆点!且能够实时报价的条件?
  • MACD多周期同显示指标
  • 通达信指标编写macd
  • 通达信指标编写macd
  • 股市MACD指标。通达信MACD指标
  • 通达信MACD公式,请高手请把下面指标公式里的金叉死叉+个箭头表示谢谢
  • Q1:请高手修改一下 MACD 公式 通达信的

    这样试试,{PRECIS0 不能用}
    DIFF:EMA(CLOSE,12) - EMA(CLOSE,26),COLORWHITE,LINETHICK2;
    DEA:EMA(DIFF,9),LINETHICK2,COLORYELLOW;
    MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK4;
    红柱天数:LAST(MACD>0,1,5),COLORRED,LINETHICK0;
    死叉天:=LAST(MACD<0,1,5);

    Q2:通达信用macd指标捕捉起爆点!且能够实时报价的条件?

    可以编写0轴上金叉同时。创30日新高的预警公式效果如下。

    Q3:MACD多周期同显示指标

    你不怕将自己看晕啊
    MACD不是神丹妙药。周期越短,MACD的滞后性越低,而MACD只有在长周期时才精准的。
    当年我干权证那会就中了1分钟的MACD的套,反应太慢了,还不如CCI迅速呢。

    Q4:通达信指标编写macd

    通达信指标编写macd
    macd的dea持续20天大于0,且macd大于0
    DIF:=(EMA(CLOSE,12)-EMA(CLOSE,26))*100;
    DEA:=EMA(DIF,9);
    MACD:=(DIF-DEA)*2;
    XG: EVERY(DEA>0 AND MACD>0,20);
    回答完毕。
    https://kuaibao.qq.com/s/20190123A18T8200
    轻松学会用通达信软件编写公式和指标

    Q5:通达信指标编写macd

    通达信指标编写macd
    macd的dea持续20天大于0,且macd大于0
    DIF:=(EMA(CLOSE,12)-EMA(CLOSE,26))*100;
    DEA:=EMA(DIF,9);
    MACD:=(DIF-DEA)*2;
    XG: EVERY(DEA>0 AND MACD>0,20);
    回答完毕。
    https://kuaibao.qq.com/s/20190123A18T8200
    轻松学会用通达信软件编写公式和指标

    Q6:股市MACD指标。通达信MACD指标

    不会写指标,不好意思

    Q7:通达信MACD公式,请高手请把下面指标公式里的金叉死叉+个箭头表示谢谢

    DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
    DEA:EMA(DIFF,9);
    MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
    低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
    STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;
    JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
    二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
    STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;
    DRAWICON(二次金叉,DEA*0.9,1) ;
    DRAWTEXT(二次金叉,0.1,' 二次金叉'),COLORYELLOW;
    DRAWICON(CROSS(DIFF,DEA),DEA*1.02,1);
    DRAWICON(CROSS(DEA,DIFF),DIFF*0.98,2);
    A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
    底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA) AND DIFF<0;
    STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
    底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4;
    DRAWTEXT(底背离,DIFF,' 底背离'),COLORFF00FF;
    A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
    顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
    顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK4;

    本文由锦鲤发布,不代表本站立场,转载联系作者并注明出处:/showinfo-6-206986-0.html